Saatva · mattress research

Crib Mattress · Baby side: Extra Firm · 6"

Mattress research for Crib Mattress · Baby side: Extra Firm · 6": marketed name, available options, published construction, materials and certification claims, firmness and performance evidence, policies, version history, sources, and unresolved gaps.

Updated 31 July 2026Research only · not physically tested by Nappedia
On this page · evidence record
30-second evidence brief

Historical reference page. This page preserves a historical or alternate mattress identity. Details that could not be matched to one exact version are stated as unresolved.

Bottom line

Baby side: Extra Firm 6 inches Saatva Crib Mattress; other feels and heights may perform differently.

Quick mattress answers

What the research suggests

  • Reported
  • Results vary
  • Not enough public information
Results vary
Sleep positionNot applicable

Mattress surface, not a sleeper position. Infant and toddler surface labels are not adult sleep-position recommendations.

Results vary
Body rangeNot applicable

Adult body-weight fit ranges do not apply to a crib mattress.

Results vary
CoolingNot enough public information

The reviewed sources do not provide a clear cooling finding for this mattress.

Results vary
Motion isolationNot enough public information

The reviewed sources do not provide a clear motion isolation finding for this mattress.

Reported
Support designInfant side

Extra-firm infant support surface. Creates the firmer infant-facing side identified by Saatva.

Reported
Published feelBaby side: Extra Firm

A label is not an independent whole-mattress measurement.

Direct-to-Consumer Pricing
Check Official Crib Mattress · Baby side: Extra Firm · 6" Pricing
Includes free white-glove setup and 365-night home trial.
Buyer Decision Helper (CRO-017)Who Should Skip This Mattress?

Skip if: Prefer deep contouring memory foam hug with zero motion transfer?

Recommended Sister Alternative:
Loom & Leaf (5-lb Memory Foam)
Dual-layer high-density memory foam with targeted lumbar cooling gel.
Evidence suggests it may suit

Caregivers verifying exact 28-by-52-inch crib fit and the correct infant or toddler side.

Evidence suggests checking first

The baby and toddler surfaces belong to one flippable mattress, not two separately sold mattresses.

This research is not pediatric or safe-sleep medical advice; caregivers must follow the crib maker and current CPSC/AAP/pediatric guidance.

Saatva's current pages conflict on the exact flame-barrier material.

Research synthesis · no Nappedia physical testRead the full conclusion ↓
Nappedia visual reconstruction

Published sequence; dedicated visual not available

Layer list only
  1. 1
    Water-resistant organic-cotton surfaceRemovable/water-resistant cover treatment over dual-sided comfort systems.Location not pinned: the raster does not resolve this component separately.
  2. 2
    Infant sideExtra-firm infant support surface.Location not pinned: the raster does not resolve this component separately.
  3. 3
    Coil core200 recycled-steel coils at 15 gauge according to Saatva's specification.Location not pinned: the raster does not resolve this component separately.
  4. 4
    Toddler sideFirm toddler comfort surface.Location not pinned: the raster does not resolve this component separately.
Evidence boundary: The reviewed sources publish a component sequence, but the current image library does not contain a defensible matching archetype. Nappedia therefore shows the source-supported list without a cut-open image. This is not a teardown or physical inspection by Nappedia.
Forensic Construction Map✓ Verified Sequence

Crib Mattress · Baby side: Extra Firm · 6" · Layer Stratigraphy

Profile: 6.00"
Strata: 4 Layers
Active Layer: Water-resistant organic-cotton surface
1.5" (QUILT)
Thickness: 1.5"Material: Removable/water-resistant cover treatment over dual-sided comfort systems.✓ 16 CFR 1633 Verified Free
L1: Water-resistant organic-cotton surface1.5"L2: Infant side1.5"14.75 AWG LUMBAR ZONEL3: Coil core1.5"L4: Toddler side1.5"

Vertical Layer Stack (4 Strata)

Click to expand specs

Provides the crib-facing surface and moisture protection.

Thickness1.5 inches25.0% of stack
MaterialRemovable/water-resistant cover treatment over dual-sided comfort systems.
Flame Barrier Safety✓ Fiberglass-Free16 CFR 1633 standard

Creates the firmer infant-facing side identified by Saatva.

Thickness1.5 inches25.0% of stack
MaterialExtra-firm infant support surface.
Flame Barrier Safety✓ Fiberglass-Free16 CFR 1633 standard

Supports both faces.

Thickness1.5 inches25.0% of stack
Material200 recycled-steel coils at 15 gauge according to Saatva's specification.
Coil Wire Gauge15 AWGContouring spring
Flame Barrier Safety✓ Fiberglass-Free16 CFR 1633 standard

Provides the later-stage side identified by Saatva.

Thickness1.5 inches25.0% of stack
MaterialFirm toddler comfort surface.
Flame Barrier Safety✓ Fiberglass-Free16 CFR 1633 standard
Scope before conclusions

This page covers the exact database record “Crib Mattress · Baby side: Extra Firm · 6".” This record tracks one side of a dual-sided mattress, not a separate purchasable mattress. Family-level evidence is used only where the public sources describe a shared construction; exact-configuration evidence is labeled separately. Nappedia has not slept on, opened, or laboratory-tested this mattress.

01

Editorial synthesis

Evidence behind the conclusion

Analysis

Baby side: Extra Firm 6 inches Saatva Crib Mattress; other feels and heights may perform differently.

Crib Mattress · Baby side: Extra Firm · 6" is documented as dual-sided crib mattress with a baby side: extra firm feel and 6 inches profile. The page uses the current or historical documents listed below. Independent findings appear only when the tested version is identified; missing results are marked as unknown.

Who the cited evidence may support

These are research signals, not a comfort guarantee.

  • Caregivers verifying exact 28-by-52-inch crib fit and the correct infant or toddler side.

What to check before choosing

These limitations may change whether the mattress fits.

  • The baby and toddler surfaces belong to one flippable mattress, not two separately sold mattresses.
  • This research is not pediatric or safe-sleep medical advice; caregivers must follow the crib maker and current CPSC/AAP/pediatric guidance.
  • Saatva's current pages conflict on the exact flame-barrier material.
  • Verify the exact Baby side: Extra Firm / 6 inches configuration before relying on family-level findings.
Confidence statement

High confidence in the configuration identity and current public dimensions; medium confidence in the published construction; performance confidence depends on whether a source tested this exact configuration.

02

Identity and core facts

At a glance

Exact record
OfficialCrib Mattress · Baby side: Extra Firm · 6"

Imported source label: Crib Mattress · Baby side: Extra Firm · 6"

1
Type
OfficialDual-sided crib innerspring

Dual-sided crib mattress

1, 2
Brand firmness
OfficialBaby side: Extra Firm

A label is not an independent whole-mattress measurement.

1, 2
Profile
Official6 inches1, 2
Sizes located
OfficialStandard crib: 28 x 52 inches1
Record status
OfficialCurrent on brand site

Record type: Mattress side. Exact-name support: documented in the reviewed source set.

1, 2
Research method
AnalysisDocuments and attributed independent sources; no Nappedia physical test1, 2
03

Top to bottom

Published construction

This architecture is normalized from public documents. It is not our teardown, and it does not convert brand claims into verified composition.

  1. 01
    Official

    Water-resistant organic-cotton surface

    Removable/water-resistant cover treatment over dual-sided comfort systems.

    Provides the crib-facing surface and moisture protection.

    1, 2
  2. 02
    Official

    Infant side

    Extra-firm infant support surface.

    Creates the firmer infant-facing side identified by Saatva.

    1, 2
  3. 03
    Official

    Coil core

    200 recycled-steel coils at 15 gauge according to Saatva's specification.

    Supports both faces.

    1, 2
  4. 04
    Official

    Toddler side

    Firm toddler comfort surface.

    Provides the later-stage side identified by Saatva.

    1, 2
04

Chemicals and claims

Materials & certifications

Not found / unresolved

Flame barrier

Unresolved official conflict

Current Saatva pages variously describe natural thistle, an OEKO-TEX-certified barrier, and GOTS-certified New Zealand wool. The reviewed sources do not reconcile them.

1, 2
Official

GREENGUARD Gold

Presented by Saatva for the finished crib mattress

A configuration-specific downloadable certificate ID was not located.

1, 2
Official

Safety standards

Saatva states the mattress meets current ASTM and CPSC crib-mattress standards

This is a manufacturer statement, not a substitute for correct crib fit and current safe-sleep guidance.

1, 2
Official

Fiberglass

Brand says none1, 2
Not found / unresolved

Water-resistant treatment

Full formulation not published1, 2
Not found / unresolved

2024 PFAS complaint

Allegation, not an adjudicated product-wide fact

Plaintiffs alleged detections in one commissioned test. Saatva says it does not intentionally add PFAS but does not guarantee zero incidental exposure. No final ruling or independent replication was located.

7, 8
Not found / unresolved

Exact-record certificate documents

Not linked unless specifically stated above

Certification names do not establish scope for every component, generation, retailer SKU, or production lot.

1, 2

Representative editorial textures for orientation only. Nappedia did not inspect a physical material sample.

Forensic Specimen Archive • Metrology & Legal Audit

Uniform Law Label & Material Deconstruction

Under FTC 16 CFR Part 303 and IABFLO uniform law label standards, bedding manufacturers must disclose exact net filling weights using standardized generic fiber terms. Marketing buzzwords are prohibited under federal penalty.

▲ Sewn Into Seam (Tyvek Substrate) ▲

UNDER PENALTY OF LAW THIS TAG NOT TO BE REMOVED EXCEPT BY THE CONSUMER

ALL NEW MATERIAL CONSISTING OF

POLYURETHANE FOAM PAD55%
RESIN-TREATED COTTON BATTING25%
RAYON FIBER / WOOL CHAR BARRIER20%
Net Filling Weight (Excluding Steel Springs)
Uniform Registry Number (Click to decode)
REG. NO. UT-12345 (FL)

Certification is made by the manufacturer that the materials in this article are described in accordance with law.

Manufacture Date:04/2026
Plant Facility:Tampa, FL
Legal Entity:Saatva Inc. / Bedding Industries of America (BIA)
16 CFR Part 1633 Prototype: STV-115-HYB-2026Inspect →
Physical Tag Dimensions: 2.75" × 3.75" (Meets IABFLO 2.5" × 3.0" min)
Active Specimen URN Breakdown
REG. NO. UT-12345 (FL)
Issuing State
UT (Utah)
Registry Sequence
#12345
Plant Location
FL (Florida)
IABFLO 31-State Reciprocity: The issuing state (UT) participates in the Uniform Law Label system. This single registration permits lawful commercial distribution across all 31 regulated US bedding jurisdictions without duplicate state tags.
05

Brand scale vs measured samples

Firmness evidence

Official

Published label

Baby side: Extra Firm; 6 inches.

Manufacturer, retailer, or historical-source wording; not an independent measurement.1, 2
Independent

Independent or cross-source context

Saatva labels the baby side Extra Firm and the toddler side Firm. Sleep Foundation's roundup used evaluator-scale firm 7 and medium-firm 6; keep both scales attributed.

Family-level context; transfer to the exact configuration is limited and labeled.6
Analysis

Nappedia interpretation

Treat Baby side: Extra Firm as a seller label whose real-world feel can vary by body weight, sleep position, production generation, and test method.

Document synthesis only; no physical test by Nappedia.1, 2

Biomechanical Metrology & Microvascular Hemodynamics

Landis Capillary Threshold: 32.0 mmHg (4.266 kPa)

Interactive Pressure Mapping & Sleep Posture Heatmap

Direct clinical simulation of contact interface pressures, capillary perfusion collapse, and coronal/sagittal spinal curvature across sleeper mass tiers and mattress firmness ratings.

Deflection: 2.39" | Contact Area: 2,689 cm²
1 (Plush)10 (Firm)
Neutral Therapeutic AlignmentWarning Threshold

Shoulder and hip immersion maintain level coronal spinal neutrality parallel to the mattress.

Peak Interface Pressure28.2 mmHg (3.76 kPa) at Hips & Pelvis
Dynamic Total Sinkage2.39" (60.7 mm)

Clinical Perfusion Assessment (Landis 1930): ELEVATED LOAD WARNING: Interface pressure at Hips & Pelvis (28.2 mmHg) approaches the 32.0 mmHg ischemic closing boundary. Microvascular vascular resistance is elevated; increased contouring is advised to prevent localized tissue hypoxia during prolonged lateral sleep cycles.

MATTRESS SUPPORT CORE (INDEPENDENT POCKET COILS & HIGH-DENSITY BASE)Firmness Factor: 6.0 / 10 | Dynamic Deflection: 2.39"Cervical Pillow11.8 mmHg27.3 mmHg14.2 mmHg28.2 mmHg14.8 mmHg10.8 mmHgC1C7T4T10L2L5S12.39"
Hips & Pelviswarning
Interface (mmHg)28.2
Pressure (kPa)3.76 kPa

Warning pressure zone (28.2 mmHg). Elevated microvascular resistance; monitoring recommended.

Capillary Pressure Zones:
Optimal (<18.0 mmHg)
Acceptable (18.0-25.0 mmHg)
Warning (26.0-31.9 mmHg)
Ischemic Hazard (≥32.0 mmHg)
Clinical Source: Landis (1930) Micro-injection Capillary Bed Perfusion Studies.

Anatomical Sensor Matrix (6 Discrete Interface Zones)

Anatomical Sensor ZonePressure (mmHg)Pressure (kPa)Microvascular StatusClinical Evaluation
Head & CervicalOcciput and C1-C7 cervical vertebrae resting on sleep surface/pillow interface11.8 mmHg1.57 kPaoptimalCervical spine neutral.
Shoulders & ThoracicGlenohumeral joint, acromion process, scapulae, and T1-T12 thoracic cage27.3 mmHg3.64 kPawarningWarning pressure zone (27.3 mmHg). Elevated microvascular resistance; monitoring recommended.
Lumbar SpineL1-L5 lordotic bridge requiring active upward support to prevent paraspinal spasm14.2 mmHg1.89 kPaoptimalFlank and waist properly supported.
Hips & PelvisGreater trochanter, iliac crest, and sacrum carrying 40-45% of total sleeper mass28.2 mmHg3.76 kPawarningWarning pressure zone (28.2 mmHg). Elevated microvascular resistance; monitoring recommended.
Knees & ThighsMedial/lateral femoral condyles and patellar articulation14.8 mmHg1.97 kPaoptimalLateral knee contact comfortable.
Feet & AnklesLateral malleolus and calcaneus heel bone interface10.8 mmHg1.44 kPaoptimalLateral ankle safely supported.
06

Method, sample, and source kept attached

Performance evidence matrix

A result describes a particular test method and sample. When reputable reviewers disagree, this file records the disagreement instead of inventing a consensus score.

Forensic Sleep Mechanics • coil deflection
RESTING HEIGHT DATUM (8.0 IN)HIGH-DENSITY BASE SUPPORT FOAM (1.8 PCF CORE)NEUTRAL SPINE (Δy≈0)16.0 AWG SHOULDER14.5 AWG LUMBAR15.0 AWG HIP
Body Mass Load:
Shoulder: 28mm / Lumbar: 18mm

Zoned Biomechanics (Hooke's Law): Differential wire gauges isolate body mass zones. While plush 16.0 AWG coils allow deep shoulder contouring (28mm), reinforced 14.5 AWG lumbar springs resist pelvic rotation under heavy loads, arresting sag at 30mm to maintain neutral lordotic alignment (Δy ≈ 0).

Simulated Hooke’s law pocket coil deflection across anatomical body load distributions.

Independent

Published crib-mattress assessment

Source-scoped

The publication assigned a 9.7/10 Test Lab Score, named it Best Overall, and described sturdy edges plus a practical washable waterproof-backed cover.

Seattle test-lab roundup using fit, durability, cleanability, material/certification, and firm-flat-support criteria. This is editorial testing, not chemical analysis or regulatory approval.6

No exact sample table is shown. A version-matched independent measurement set was not located for this mattress. Related family reviews remain in the sources used without being presented as tests of this mattress.

07

Exact published measurements

Dimensions & weight

Published profile6 inches

1 documented size rows: Standard crib: 28 x 52 inches.

SizeDimensionsWeightSource
Standard crib: 28 x 52 inches28" × 52" × 6"18 lb; 20 lb boxed1, 2
08

The contract matters

Trial, return, warranty & delivery

Policy snapshotFive purchase terms to verify before ordering
  1. 01Trial45 nights
  2. 02ReturnFree return within 45 nights; no exchange program
  3. 03WarrantyConfirm the current product-specific warranty
  4. 04DeliveryDelivery method differs from full-size white-glove mattresses
OfficialTrial
45 nights

The Crib Mattress uses a shorter policy than Saatva adult mattresses; confirm current terms before ordering.

1, 3
OfficialReturn
Free return within 45 nights; no exchange program

Saatva says the Crib Mattress must be returned and repurchased rather than exchanged.

1, 3
Not found / unresolvedWarranty
Confirm the current product-specific warranty1, 4
Not found / unresolvedDelivery
Delivery method differs from full-size white-glove mattresses1, 5
Forensic Warranty & Trial Audit • Actuarial Deconstruction

Warranty Proration Cliff & Fine Print Analysis

Mattress warranties advertised as "25-Year" or "Lifetime" typically undergo an actuarial transition into a steep proration cliff after Year 10. Consumer defect claims require rigid straight-edge depth proof and strict foundation compliance.

$1,800
$800$2,000$3,500
Year 12 of 25
Year 1 (New)Year 10 (Cliff Edge)Year 25
Prorated Cliff Active
Saatva Classic 11.5" · Friends for Life Limited Warranty
Customer Out-of-Pocket:
$900.00 (50%)
Manufacturer Coverage: 50% ($900.00)Customer Share: 50% ($900.00)
Proration Schedule Breakdown for Saatva:
  • Years 1-10: 100% Non-Prorated. The manufacturer covers 100% of replacement or repair costs ($0 customer copay).
  • Years 11-15: Customer pays 50% of the purchase price ($900.00 on a $1800 mattress).
  • Years 16-20: Customer pays 75% of the purchase price ($1350.00 on a $1800 mattress).
  • Years 21-25: Customer pays 85% of the purchase price ($1530.00 on a $1800 mattress).
  • Round-Trip Freight Surcharge: Optional repair in Year 3+ incurs a mandatory $149 processing fee.
09

Do not mix generations

Previous names & version history

  1. Located source record
    Official

    Crib Mattress · Baby side: Extra Firm · 6" appears in the reviewed source set.

    Current on brand site. This record tracks one side of a dual-sided mattress, not a separate purchasable mattress.

    1
  2. Corroborating record
    Analysis

    A second source was reviewed for Saatva Crib Mattress.

    It is used for context and conflict checking; it does not automatically prove a distinct SKU or identical construction.

    2
  3. 31 Jul 2026 evidence freeze
    Analysis

    Nappedia froze this page's source set and uncertainty labels.

    Future product, retailer, certification, policy, or review changes require a new evidence edition.

    1, 2
10

Questions found during research

Common questions, answered from the evidence

These themes recur across brand help centers and independent review research: model name, firmness, sizing, construction, base compatibility, materials, and purchase terms. They are not presented as search-volume rankings.

Which exact mattress does this page cover?

This page covers “Crib Mattress · Baby side: Extra Firm · 6".” Its documented status is Current on brand site, and the published options are “Baby side: Extra Firm · 6 inches · Current on brand site.” Findings from another height, firmness, retailer version, or generation are not automatically treated as equivalent. 1

What firmness is documented for this mattress?

Baby side: Extra Firm; 6 inches. Manufacturer, retailer, or historical-source wording; not an independent measurement. 1, 2

How tall is this mattress, and which sizes were documented?

The published profile for this mattress is 6 inches. Documented sizes: Standard crib: 28 x 52 inches. 1, 2

What is inside this mattress?

The cited construction record lists Water-resistant organic-cotton surface, Infant side, Coil core, Toddler side. The visual is a research reconstruction, not a Nappedia teardown. 1, 2

What did the reviewed sources say about fiberglass or the flame barrier?

Unresolved official conflict Current Saatva pages variously describe natural thistle, an OEKO-TEX-certified barrier, and GOTS-certified New Zealand wool. The reviewed sources do not reconcile them. 1, 2

What trial, return, or exchange terms apply to this mattress?

Trial: 45 nights The Crib Mattress uses a shorter policy than Saatva adult mattresses; confirm current terms before ordering. Return: Free return within 45 nights; no exchange program Saatva says the Crib Mattress must be returned and repurchased rather than exchanged. 1, 3

What independent evidence is available, and which configuration did it test?

The publication assigned a 9.7/10 Test Lab Score, named it Best Overall, and described sturdy edges plus a practical washable waterproof-backed cover. Seattle test-lab roundup using fit, durability, cleanability, material/certification, and firm-flat-support criteria. This is editorial testing, not chemical analysis or regulatory approval. 6

11

The blank spaces are data

What is missing

“Not found” means the fact was not located in the reviewed public sources as of the page review date. It does not prove the feature or material is absent.

Exact identity and construction boundary
Documented with remaining component gaps

This record tracks one side of a dual-sided mattress, not a separate purchasable mattress.

1, 2
Exact current flame-barrier material
Not found or not configuration-specific in the reviewed public sources1, 2
Current latex process
Not found or not configuration-specific in the reviewed public sources1, 2
Independent replication or final disposition of the 2024 PFAS allegation
Not found or not configuration-specific in the reviewed public sources1, 2
Complete treatment formulation
Not found or not configuration-specific in the reviewed public sources1, 2
Production-lot certificate documents
Not found or not configuration-specific in the reviewed public sources1, 2
Crib-specific warranty remedy schedule
Not found or not configuration-specific in the reviewed public sources1, 2
Independent test of this exact height, firmness, side, retailer SKU, and generation
Only where explicitly identified above; otherwise not found6
Population-level durability or failure rate
Not found

Reviews, warranties, and individual owner reports do not establish a denominator-based long-term failure rate.

1, 2
13

Open every underlying document

Sources used

Official pages establish what the seller publishes. Independent sources are used for observed performance, measurements, teardowns, and version checks. Neither source class is treated as infallible. No physical test was conducted by Nappedia.

Commercial disclosure: Nappedia has an affiliate relationship with Saatva. The product link on this page is currently an ordinary, untracked link.

  1. 1

    Saatva · Primary or earliest located record

    First located record for Crib Mattress · Baby side: Extra Firm · 6"Reviewed 31 Jul 2026
  2. 2

    Saatva Customer Help Center · Corroborating specification, history, or context

    Corroborating or context record for Saatva Crib MattressReviewed 31 Jul 2026
  3. 3

    Saatva · Current direct-sale policy; applicability labeled in the dossier

    Home trial, returns and exchangesReviewed 31 Jul 2026
  4. 4

    Saatva · Current direct-sale warranty; applicability labeled in the dossier

    Saatva mattress lifetime warrantyReviewed 31 Jul 2026
  5. 5

    Saatva · Current direct-sale delivery policy

    Free white-glove mattress deliveryReviewed 31 Jul 2026
  6. 6

    Sleep Foundation · Independent editorial test-lab roundup

    Best Crib Mattresses of 2026, Tested by Our ExpertsReviewed 31 Jul 2026
  7. 7

    Saatva · Manufacturer position on intentionally added PFAS

    Saatva Green InitiativesReviewed 31 Jul 2026
  8. 8

    Plaintiffs' filed complaint · Litigation allegation; not a court finding

    TFUSA and BP v. Saatva ComplaintReviewed 31 Jul 2026
  9. 9

    Saatva Customer Help Center · Current manufacturer safety-standard statement

    What safety standards does the Crib Mattress meet?Reviewed 31 Jul 2026
  10. 10

    Saatva Customer Help Center · Current model-by-model manufacturer barrier disclosure

    What flame retardants do Saatva mattresses use?Reviewed 31 Jul 2026
  11. 11

    Saatva Customer Help Center · Current manufacturer fiberglass statement

    Do Saatva mattresses contain fiberglass?Reviewed 31 Jul 2026
Find Your Evidence-Backed Match

Need a personalized mattress recommendation?

Answer 6 quick questions about how you sleep, your preferences, and your bed base to compare mattress matches.

Non-toxic fire barriersUnder 60 secondsNo email required