Brooklyn Bedding LLC / 3Z Brands
Titan Plus 10-Year Limited Warranty Agreement
Manufacturer Policy
Titan Plus Mattress Sagging Threshold for Heavy Sleepers
Deconstructs Titan Plus 1.0-inch sagging threshold, 13.5-gauge TitanCore coils, and bariatric warranty protections.
1.0-Inch Heavyweight Standard
Direct answer summary
The Titan Plus mattress, engineered specifically for heavyweight sleepers up to 500 lbs per sleeper (1,000 lbs total), carries a 10-year limited warranty with a 1.00-inch (25.4 mm) sagging threshold. While many heavyweight mattresses increase the sag threshold to 1.5 or 2.0 inches, Brooklyn Bedding maintains a strict 1.0-inch threshold due to heavy-duty 13.5-gauge TitanCore pocketed coils and high-density 1.8+ PCF foams.
Key points
Engineered for sleepers up to 500 lbs per side with an unweighted 1.0" sag threshold.
Utilizes industrial-grade 13.5-gauge pocketed coils and high-density support foams.
Requires heavy-duty platform foundations rated for at least 1,200 lbs total load.
Interactive example
Explore an example related to this answer.
Interactive Warranty Calculator
Interactive Visual Tool
Warranty Fine-Print & Trial Policy Deconstruction
Calculate proration cliffs, test unweighted sagging ruler thresholds, and verify foundation slat gap compliance before submitting a claim.
Trial, returns and warranty: the fine print
Warranty Proration Cliff & Fine Print Analysis
Mattress warranties advertised as "25-Year" or "Lifetime" typically undergo an actuarial transition into a steep proration cliff after Year 10. Consumer defect claims require rigid straight-edge depth proof and strict foundation compliance.
$1,800
$800$2,000$3,500
Year 12 of 25
Year 1 (New)Year 10 (Cliff Edge)Year 25
Prorated Cliff Active
Titan Titan Plus 11" · Friends for Life Limited Warranty
Customer Out-of-Pocket:
$900.00 (50%)
Manufacturer Coverage: 50% ($900.00)Customer Share: 50% ($900.00)
Proration Schedule Breakdown for Titan:
- Years 1-10: 100% Non-Prorated. The manufacturer covers 100% of replacement or repair costs ($0 customer copay).
- Years 11-15: Customer pays 50% of the purchase price ($900.00 on a $1800 mattress).
- Years 16-20: Customer pays 75% of the purchase price ($1350.00 on a $1800 mattress).
- Years 21-25: Customer pays 85% of the purchase price ($1530.00 on a $1800 mattress).
- Round-Trip Freight Surcharge: Optional repair in Year 3+ incurs a mandatory $149 processing fee.
Specifications
Recorded specifications
Values and benchmarks recorded for this question.
| Specification | Measured value | Benchmark | Status |
|---|---|---|---|
| Sagging Threshold | 1.00 Inch Unweighted Depression | Superior Bariatric Warranty | pass |
| Coil Wire Caliber | 13.5 AWG TitanCore Tempered Steel | Heavy-Duty Innerspring | pass |
| Weight Rating Capacity | Up to 1,000 lbs Combined Sleeper Load | Bariatric Sleep Standard | pass |
| Foundation Slat Gap Limit | Max 3.0 Inches on Heavy-Duty Frame | Prevents Heavyweight Sagging | pass |
Standards reference: Benchmarks derived from ASTM D3574 (flexible cellular foam), CPSC 16 CFR 1633 (open flame flammability), and clinical capillary closing thresholds (32.0 mmHg).
Checklist
Warranty Claim Diagnostic & Measurement Protocol
Unweighted ruler measurement and photographic documentation steps to avoid warranty claim denial.
- 01
Verify 1.0 Inch Sag
Measure the unweighted depression using a straightedge across the sleep surface.
Watch for: Ensure measurement is taken unweighted; body impressions under load are not measured.
- 02
Check Heavy-Duty Frame
Ensure the bed frame has a weight rating of at least 1,200 lbs with heavy steel center legs.
Watch for: Standard lightweight bed frames easily buckle under heavyweight mattress loads.
- 03
Submit Claim to Brooklyn Bedding
Upload photos of the ruler test, law label, and frame to Brooklyn Bedding support.
Watch for: Never remove the statutory Tyvek label stitched to the bottom border.
Sources
Sources for this answer
Read the source documents behind the thresholds, measurements, and policy details used here.
View source
ASTM International
Standard Test Methods for Evaluating Innersprings
ASTM F1566