Tempur Sealy International Inc.
Sealy Official Limited Warranty Certificate
Manufacturer Policy
Sealy Mattress Warranty 1.5" Sag Ruler Test
Guide to Sealy Posturepedic 1.5-inch sagging warranty inspections, string tests, and foundation rules.
1.5-Inch Industry Standard
Direct answer summary
Sealy Posturepedic limited warranties mandate an unweighted indentation of 1.50 inches (38.1 mm) or greater for innerspring and hybrid models. Under Sealy's warranty guidelines, impressions under 1.5 inches are classified as normal body contouring. The measurement must be taken with the mattress resting on a certified Sealy foundation or rigid platform with proper center floor support legs, using an unweighted string and calibrated ruler.
Key points
Mandates 1.50-inch unweighted sagging threshold across innerspring and hybrid models.
Depressions under 1.5 inches are excluded as normal body settling.
Requires a matching rigid foundation with center support legs on Queen and King frames.
Interactive example
Explore an example related to this answer.
Interactive Warranty Calculator
Interactive Visual Tool
Warranty Fine-Print & Trial Policy Deconstruction
Calculate proration cliffs, test unweighted sagging ruler thresholds, and verify foundation slat gap compliance before submitting a claim.
Trial, returns and warranty: the fine print
Warranty Proration Cliff & Fine Print Analysis
Mattress warranties advertised as "25-Year" or "Lifetime" typically undergo an actuarial transition into a steep proration cliff after Year 10. Consumer defect claims require rigid straight-edge depth proof and strict foundation compliance.
$1,800
$800$2,000$3,500
Year 12 of 25
Year 1 (New)Year 10 (Cliff Edge)Year 25
Prorated Cliff Active
Sealy Posturepedic Plus 14" · Friends for Life Limited Warranty
Customer Out-of-Pocket:
$900.00 (50%)
Manufacturer Coverage: 50% ($900.00)Customer Share: 50% ($900.00)
Proration Schedule Breakdown for Sealy:
- Years 1-10: 100% Non-Prorated. The manufacturer covers 100% of replacement or repair costs ($0 customer copay).
- Years 11-15: Customer pays 50% of the purchase price ($900.00 on a $1800 mattress).
- Years 16-20: Customer pays 75% of the purchase price ($1350.00 on a $1800 mattress).
- Years 21-25: Customer pays 85% of the purchase price ($1530.00 on a $1800 mattress).
- Round-Trip Freight Surcharge: Optional repair in Year 3+ incurs a mandatory $149 processing fee.
Specifications
Recorded specifications
Values and benchmarks recorded for this question.
| Specification | Measured value | Benchmark | Status |
|---|---|---|---|
| Sagging Threshold | 1.50 Inches Unweighted Indentation | Traditional Innerspring Standard | pass |
| Warranty Period | 10-Year Limited Warranty (Non-Prorated) | Standard Tier-1 Duration | pass |
| Foundation Compliance | Sealy Flat Foundation or Solid Platform | Rigid Support Required | pass |
| Stain Void Clause | Strict Void on Fluid or Bio Stains | OSHA Biohazard Standard | warning |
Standards reference: Benchmarks derived from ASTM D3574 (flexible cellular foam), CPSC 16 CFR 1633 (open flame flammability), and clinical capillary closing thresholds (32.0 mmHg).
Checklist
Warranty Claim Diagnostic & Measurement Protocol
Unweighted ruler measurement and photographic documentation steps to avoid warranty claim denial.
- 01
Lay String Across Seams
Stretch a straight string across the tape edge directly over the deepest hollow.
Watch for: Do not let the string touch the quilt crown; hold it firmly at edge bindings.
- 02
Insert Ruler Perpendicularly
Drop a ruler into the hollow and record the exact fraction of an inch.
Watch for: Never apply downward pressure on the ruler to push into the foam.
- 03
Document Foundation Legs
Take photos of the bed frame showing center support legs touching the floor.
Watch for: Missing center legs will cause instant claim rejection by Sealy claims adjusters.
Sources
Sources for this answer
Read the source documents behind the thresholds, measurements, and policy details used here.
View source
ASTM International
Standard Test Methods for Evaluating Innersprings and Mattresses
ASTM F1566