WinkBeds Inc.
WinkBeds Manufacturing Specifications: The WinkBed Innerspring Core
Manufacturer Specification
WinkBed 858 Pocket Coils & Lumbar Zones
Innerspring zoning breakdown: analyzing WinkBed's 858 pocket coil core, 13.5-gauge center lumbar zone, and extra-firm edge perimeter coils.
3-Zone Layout with 13.5 AWG Center
Direct answer summary
The WinkBed hybrid (Queen size) utilizes an engineered 858-count pocket spring unit featuring a precise 3-zone ergonomic layout. The head and foot zones utilize flexible 14.5-gauge coils to gently cradle shoulders and calves. The middle third lumbar zone reinforces the pelvis using heavier 13.5-gauge coils to prevent spinal sag. The perimeter is fortified with double rows of ultra-firm 12.5-gauge coils for exceptional sitting edge support.
Key points
WinkBed uses 858 individually wrapped pocket coils in a Queen configuration.
Center lumbar third uses heavy 13.5 AWG wire to prevent pelvic sinking and lower back ache.
Outer edges are fortified with double-row 12.5 AWG coils for industry-leading perimeter support.
Interactive example
Explore an example related to this answer.
3D Layer-Peel Visualizer
Interactive Visual Tool
Interactive Exploded Architecture & Layer Inspection
Peel through the physical mattress assembly to audit coil gauge, foam density (PCF), indentation load deflection (ILD), and flame barrier composition.
What's insideDrawing only, layer order not confirmed
WinkBed 3-Zone Innerspring Layout layers
Height: 24.00"
Layers: 3 Layers
1/3
All
Active Layer: Center Lumbar Pocket Coils
8" (CORE)Thickness: 8"Material: Tempered Steel Pocket SpringsGauge: 13.5 AWGCoils: 13.5 AWG Micro-Coils
Layers, top to bottom (3)
Click to expand specs13.5 AWG center zone for pelvis elevation
Thickness8 inches33.3% of stack
MaterialTempered Steel Pocket Springs
Coil Wire Gauge13.5 AWGFirm support spring
14.5 AWG compliant coils for pressure relief
Thickness8 inches33.3% of stack
MaterialTempered Steel Pocket Springs
Coil Wire Gauge14.5 AWGFirm support spring
Double row 12.5 AWG perimeter coils
Thickness8 inches33.3% of stack
MaterialHigh-Tensile Edge Springs
Coil Wire Gauge12.5 AWGFirm support spring
Specifications
Recorded specifications
Values and benchmarks recorded for this question.
| Specification | Measured value | Benchmark | Status |
|---|---|---|---|
| Total Queen Coil Count | 858 Individually Encased Pocket Coils | High-Density Pocket Spring Core | pass |
| Center Lumbar Wire Gauge | 13.5 AWG (Heavy-Duty Center Third) | Prevents Pelvic Hammocking | pass |
| Shoulder Zone Wire Gauge | 14.5 AWG (Adaptive Pressure Relief) | Enables Shoulder Sinkage | pass |
| Perimeter Edge Wire Gauge | 12.5 AWG Extra-Edge Double Row | Industry-Leading Edge Pushback | pass |
Standards reference: Benchmarks derived from ASTM D3574 (flexible cellular foam), CPSC 16 CFR 1633 (open flame flammability), and clinical capillary closing thresholds (32.0 mmHg).
Checklist
Comparative Spec Verification Checklist
Step-by-step inspection to detect mid-production substitutions and compare component specs.
- 01
Verify Lumbar Support Feel
Lie on your back on the WinkBed and verify firm pushback directly beneath the lower back.
Watch for: If the center of the bed feels soft or bouncy, verify your bed frame center leg touches the floor.
- 02
Test Sitting Edge Stability
Sit on the absolute edge of the WinkBed; note minimal deflection (< 2.5 inches).
Watch for: Avoid sitting on the corners of beds lacking reinforced perimeter coils.
- 03
Rotate Every 90 Days
Rotate the mattress head-to-foot every 3 months to ensure uniform wear across the 3 zones.
Watch for: Never attempt to flip a one-sided WinkBed upside down.
Sources
Sources for this answer
Read the source documents behind the thresholds, measurements, and policy details used here.
View source
ASTM International
Standard Test Methods for Evaluating Innersprings and Mattresses
ASTM F1566