The Saatva Solaire suits couples who never agree on firmness, since each side has its own air chamber and 50 settings. Skip it if you want a plain bed with no remote, pump or power cord. The catch is price: the Queen listed at $4,789 in September 2026, more than double the Saatva Classic.
Best forCouples who disagree on firmness
Not ideal forAnyone who wants a simple bed with no pump or remote
Saatva Solaire
Pros
Each side adjusts. Partners can each pick their own firmness from 50 settings with a remote.
Soft on joints. NapLab gave it its top score for easing pressure on hips and shoulders.
Sleeps cool. Latex, a cotton cover and air chambers hold less heat than thick foam.
Long parts cover. Saatva says pump and air parts are covered for years past the trial.
Cons
Very expensive. It is the priciest Saatva bed, at $4,789 for a Queen in September 2026.
Needs power. The air system needs an outlet near the bed and a remote to change feel.
Deep sink when soft. NapLab found you sink in a lot on softer settings, so heavier people should go firmer.
Special sheets. Split and Upper-Flex sizes need special fitted sheets.
How firm is the Saatva Solaire, and which firmness should you pick?
The Saatva Solaire has no single firmness. You set it with a remote, from 0 to 50, and each side of a Queen or larger bed sets its own level. Outside tests show how wide that range is.
Lowest settings: NapLab rated the softest end about 4 out of 10. Sleep Foundation put it near 3.
Setting 30: NapLab called this about 6 out of 10, which is medium firm.
Highest settings: about 8 out of 10, which is firm.
How to pick: Saatva suggests sleeping on one setting for about a week before you change it. Side sleepers and lighter people tend to like the soft end. Stomach sleepers and heavier people tend to like the firm end. The remote can save two favorite settings.
Is the Saatva Solaire right for your sleep position and body weight?
The Saatva Solaire can fit any sleep position, because you change the firmness to match how you sleep.
Side sleepers: use a softer setting so the hips and shoulders can sink in.
Back sleepers: a middle setting keeps the spine fairly straight.
Stomach sleepers: a firm setting stops the hips from dipping.
Couples: on a Queen or larger, each person picks their own level.
NapLab lists it as a fit for all positions and body weights. One caution: NapLab measured deep sinking even at a middle setting, so heavier back and stomach sleepers should set it firmer. Saatva lists a weight limit of up to 800 pounds per sleeper. Edge support is good for an air bed. NapLab scored it high, but Sleep Foundation was less impressed, so the edge feels softer than a coil bed.
The Saatva Solaire is a good pick for back pain, mainly because you can change the firmness when your pain changes. Saatva pitches it that way, for injuries, flare-ups or pregnancy.
It also has a thin latex layer with five zones, which means it is a bit firmer under the lower back and hips. NapLab gave it its top score for pressure relief. The National Council on Aging named it the best alternative to the Sleep Number i8 in 2026, partly for its adjustable firmness.
These are brand and tester views, not medical studies. A middle setting is a sensible start for back sleepers with low back pain. If your hips sink too far, go a few steps firmer.
The Saatva Solaire sleeps cool for an adjustable bed. Its top has latex, which breathes well, under an organic cotton cover. Saatva says the gel memory foam layer pulls heat away from your body. The air chambers below do not trap heat the way a thick block of foam does.
NapLab gave it a perfect cooling score. Sleep Foundation rated it good but not top of the class. Sleep Advisor suggests it for hot sleepers. If you run very hot, pair it with cotton or linen sheets.
You will feel little of your partner's movement on most Queen and larger Saatva Solaire beds, since each side sits on its own air chamber. NapLab scored motion control high, and Sleep Advisor praised it too. Sleep Foundation gave a middling score, so testers do not fully agree.
When your partner changes their firmness, your side stays the same. Light sleepers may still notice the pump running for a moment. Twin XL and Full sizes have one chamber, so they do not split the bed.
The Saatva Solaire is worth it only if you will really use the adjustable sides. Saatva listed the Queen at $4,789 on September 25, 2026. Sale prices run lower: NapLab saw $4,099 for a Queen in May 2026.
It comes in one height, 13 inches. Sizes are Twin XL, Full, Queen, King, Cal King, Split King and Split Cal King. Queen and King also come as Upper-Flex, where the top half of each side splits so one person can raise their head on an adjustable base.
Saatva compares it to the Sleep Number i10, which costs more. If you and your partner like the same feel, the Saatva Classic costs far less and gives a similar plush top.
You can buy the Saatva Solaire only from Saatva, online or by phone. Saatva also runs about 35 Viewing Rooms, which are showrooms where you can lie on the beds. At this price, try the remote and a few settings in person before you order, if one is near you.
Full where to buy and try rules for every model: Saatva review →
The Saatva Solaire is an air bed with a plush top. From top to bottom, Saatva lists:
An organic cotton cover.
A 3 inch Euro pillow top, a soft padded layer sewn on top.
1 inch of latex with five support zones.
2 inches of gel memory foam.
Two air chambers, with a quiet pump built into the bed.
You can flip the latex and foam layers. Latex on top feels springier, and foam on top hugs more. The bed is 13 inches tall. Saatva says a Queen weighs 114 pounds. Use deep pocket sheets, and buy special split sheets for Split and Upper-Flex sizes.
The Saatva Solaire uses an organic cotton cover, latex and gel memory foam. Saatva says the foams are CertiPUR-US certified, which checks the foam for certain harmful chemicals and fumes. It does not cover the rest of the bed.
Saatva says the latex holds OEKO-TEX Standard 100, eco-INSTITUT, Rainforest Alliance and Cradle to Cradle labels. These test for harmful substances and check how the latex is sourced.
New smell should be mild. NapLab gave it a high score for low off-gassing, which is the plastic smell some new beds give off.
No. Saatva says it uses no fiberglass in any of its beds. For the fire barrier on the Saatva Solaire, Saatva uses Paladin, a blend of fire-resistant rayon and polyester fibers. It is the only Saatva bed that uses this barrier.
This comes from Saatva, not a lab test. To check, read the law tag sewn onto the bed. It lists what is inside.
The Saatva Solaire works on a foundation, a box spring, a platform bed or an adjustable base. It also needs a power outlet close to the bed for the air pump.
Platform beds: slats should be at least 3 inches wide and less than 4 inches apart, with a center leg.
Adjustable bases: Upper-Flex sizes pair with a split-top adjustable base, so each person can raise their head. Split King and Split Cal King pair with split bases.
Queen and larger: the frame needs center support to keep the warranty.
How long will it last, and does it need flipping or rotating?
Saatva estimates the Saatva Solaire lasts about 25 years. That is the brand's own guess, not a test result. The pump and air parts are the most likely things to wear out, and the warranty covers them.
You do not need to rotate it, since the zoned latex is set to match your body. Do not flip the bed over. You can flip the comfort layers inside to change the feel. Saatva says the air chambers settle over the first day or two, so firmness readings may shift a little at first.
The Saatva Solaire comes with free White Glove delivery. A crew brings it into the room you pick, sets it up and connects the air system. Saatva makes each bed to order, so expect 9 to 21 days. Old mattress removal is free if you ask at checkout. Check that the remote works before the crew leaves.
Full delivery and setup rules for every model: Saatva review →
The Saatva Solaire has a 365 night home trial, the same as other Saatva beds. If you return it, Saatva picks it up and keeps a $99 fee from your refund. Swapping it for another Saatva bed also costs $99. Use the trial to test several settings, since finding the right one takes time.
Full trial and return rules for every model: Saatva review →
The Saatva Solaire has a lifetime warranty with its own terms. If a covered flaw shows up in the first 3 years, Saatva repairs it at no cost. In years 4 to 7 you pay half the cost of the parts, and in years 8 to 10 you pay three quarters. Saatva covers the labor through year 10. From year 11 on, you pay most of the parts cost and the labor.
In years 4 to 10 you can instead take a new bed once, for half or three quarters of what you paid, plus a $99 fee. A weak base, stains or buying it used can void the warranty.
Owners mostly like the Saatva Solaire, though public data is thin. Sleep Advisor showed a 4.9 out of 5 average from buyers in May 2026, but that score comes from Saatva's own site, so treat it as a rough guide.
Common praise: couples like setting each side their own way.
Common complaints: the high price and a remote that feels clunky.
We found no large count of reviews for this model alone.
We did not test this mattress in person. This page draws on Saatva's own product, trial, delivery and warranty pages, checked in September and October 2026. We also used scores from NapLab, Sleep Foundation and Sleep Advisor, dated prices and owner reviews, and we label brand claims as brand claims.
We could not find enough good evidence to answer these questions yet, so this page leaves them out: Changes Since Launch.
Answer 4 quick questions about your sleep position, body weight, and back support needs to get model suggestions based on the specs each brand publishes.
