The 30-second answer Store a latex mattress flat on firm, level support, though flat-storage advice is specific to some makers’ mattresses. For storage beyond a few weeks, use a breathable cover, keep moisture under control, and check the maker’s warranty for storage or boxing limits. Get help moving an assembled mattress, label modular layers, and check their alignment before use.
Avocado says its Eco line should be stored flat, never upright ; use firm, flat support on a level surface.
A mattress on a slatted frame with a center support leg reaching the floor, beside the slats from above with a tape measure across them, marking a slat and the gap center support gap slat Latex Mattress Factory recommends a firm, flat base or slats less than 3 inches apart for its mattress. Kymdan allows its mattress on a flat floor or a flat bed with a solid surface or slats no more than 3 cm apart . If using the floor, put a tarp down first to keep the mattress clean. Sources (5) Before storage, make sure the mattress is clean and fully dry .
A spot-cleaned mattress left bare on its base beside an open window, with air moving across it and the bedding set aside until it is fully dry open window damp spot bedding back on when dry left uncovered until dry Some covers are washable, while some mattresses should not get wet or can be damaged by certain cleaning agents. For natural rubber latex, wipe a dirty area with a damp cloth, then air-dry indoors or use a fan. Let latex dry completely before putting its cover back on. If an item is water-damaged, the EPA advises drying it within 24 to 48 hours to help prevent mold growth. Avoid trapping significant moisture inside the mattress. Sources (4) Avocado recommends a breathable case for its mattress stored more than a few weeks, and Sealy says its mattress must not be vacuum-sealed.
A mattress under a breathable bag or cotton sheet beside a mattress wrapped tightly in sealed plastic, with a note to avoid the plastic unless the maker says otherwise breathable bag or cotton sheet tightly sealed plastic avoid unless the maker says otherwise For storage longer than a few weeks, Avocado recommends a breathable case for its mattress. Breathable covers can include fabric mattress bags or cotton sheets. Sealy permits wrapping its mattress in plastic, but says not to vacuum-seal it. Sealed plastic can trap moisture, so Sleeping Organic advises breathable covers for latex layers. A cover that fully surrounds the mattress can protect it from dust, dirt, debris, moisture, and potential pests. If using plastic sheeting, cover the whole mattress and keep duct tape off the mattress itself. Sources (4) Keep the mattress away from excess moisture and extreme temperatures .
A bedroom with a thermometer and a humidity gauge on the wall, and a bed with a pillow and bedding over a topper whose cover and core are marked thermometer humidity gauge topper cover topper core bedding A climate-controlled storage unit can help protect against high humidity and extreme temperatures. Sleeping Organic advises against storing latex in an uncontrolled garage, attic, or outdoor shed. The EPA advises keeping indoor humidity below 60% , ideally between 30% and 50% , if possible. Kymdan warns against exposing its mattress to temperatures above 40°C/104°F for an extended time. Avocado says temperature control is ideal, though its latex can survive below-freezing temperatures and very hot, dry conditions. Sources (5) Kymdan says not to fold or roll its mattress; Sealy says its mattress must not be vacuum-sealed.
Kymdan says not to fold or roll its latex mattress. Sealy permits plastic wrapping for its mattress, but says it must not be vacuum-sealed. Sleeping Organic warns that leaving latex folded for more than 30 days can cause permanent compression marks. Sleep Foundation advises against moving a mattress in a vehicle that requires it to be folded, rolled, or smashed to fit. Turmerry’s warranty excludes damage from improper storage or handling. Sleep EZ’s warranty terms mention leaving its latex mattress boxed for more than 30 days . Sources (6) For modular latex layers, label each bag or box with the layer’s firmness and position.
Label each bag or box with the layer’s firmness and position to make reassembly easier. Latex Mattress Factory advises sending large waves through a layer when handling it. Dawn Latex warns that lifting a core by its corners or edges can tear it. Keep removed latex cores covered, indoors, and somewhere with good ventilation. A single glued latex unit is harder to move and may require multiple people and specialized equipment. Sources (3) Keep other items off the mattress while it is stored.
Saatva advises against placing objects on its stored mattress to prevent damage. Kymdan says its mattresses should not be placed on top of another mattress. Sources (2) Get help moving an assembled latex mattress, and lift it by its full thickness .
Two people carrying a mattress on its side by straps wrapped around it, with a dolly standing nearby straps dolly An assembled, non-modular latex mattress may weigh 90 to 150+ pounds and require 2 to 4 people to move. Dawn Latex says it is generally better if two people can share the weight when lifting. Grip the mattress across its full thickness and weight, rather than lifting only by handles. One person can move individual 20 to 30-pound layers from a modular bed. A closed, locking moving truck can keep rain and dirt out during transport. When assembling, take care not to pull or tear latex layers. Sources (4) Avocado recommends a breathable case for its mattress stored more than a few weeks; check the warranty for storage exclusions.
A mattress being turned end to end beside three example care schedules from different makers, each drawn as marked months on a year, to show that rotation schedules differ by maker turn end to end maker A maker B maker C a year of months; schedules differ Avocado recommends a breathable case when storing its mattress for more than a few weeks. Saatva says a mattress may be stored for a few months to a year or more without damage. Saatva recommends airing out a stored mattress at least once every 3 or 4 months . Mold may begin growing indoors when mold spores land on wet surfaces. Check the mattress warranty for exclusions related to dampness, mold, spills, or improper ventilation. Keep any maker-specified flipping or rotation schedule while the mattress is in storage. Sources (6) Before using the mattress again, check its layers ; if it was stored in bags, air it out for a few hours.
If it was stored in bags, let it air out for a few hours. After reassembly, check that the layers are in the correct order and aligned inside the cover. A ridge or bump at the top after assembly means the mattress must be disassembled and reassembled correctly. Latex that has been cold may take longer to regain its original shape. Keep natural rubber latex away from sunlight; heat or UV rays can make it crisp. If mold is a problem in the home, clean it up promptly and fix the water problem. Sources (5) Can I store a latex mattress on the floor? Kymdan allows its mattress on a flat floor, but check the mattress warranty first .
Kymdan allows its mattress on a flat floor, while Peace Lily’s warranty mentions using its mattress directly on the floor. If you use the floor, a tarp can help keep the mattress clean. A mattress that lacks airflow can develop mildew, especially over an organic or moist surface. Some mattress warranties may also be void if a mattress is laid on the floor.
Sources (5) Can cold weather harm a stored latex mattress? Cold weather may slow a latex mattress’s return to its original shape, but Avocado says its latex will be fine in the long term.
Sources (1) Should I check the mattress warranty before storing it? Yes, check the mattress warranty for storage and handling limits.
Turmerry’s warranty excludes damage from improper storage and handling. Sleep EZ’s warranty terms mention its latex mattress being left boxed for more than 30 days . Peace Lily’s warranty excludes improper storage, including damp locations or folding.
Sources (3) Can sunlight damage a latex mattress in storage? Heat or UV rays can make natural rubber latex crisp, so keep it away from sunlight. Kymdan warns not to dry a wet mattress directly in the sun.
Sources (2) We read 16 published pages from 16 sites (help.avocadogreenmattress.com, latexmattressfactory.com, Sleep Foundation, sleepingorganic.com and 12 more), checked in October 2026. Every sentence in the answers above cites one of them; the offer card at the end names its own source. This page reports published sources only; we did not test mattresses in person.
Sources (16) help.avocadogreenmattress.com: 4988602 how do i store my mattress , checked 2026-10-23latexmattressfactory.com: assembly product care information , checked 2026-10-23Sleep Foundation: how to store a mattress , checked 2026-10-23sleepingorganic.com: how to move and store a latex mattress , checked 2026-10-23epa.gov: brief guide mold moisture and your home , checked 2026-10-23turmerry.com: warranty , checked 2026-10-23sleepez.com: warranty , checked 2026-10-23kymdan.com: huong dan su dung , checked 2026-10-23Saatva: how to store a mattress , checked 2026-10-23wellatex.com: how to install and care , checked 2026-10-23shepherdsdream.com: product care instructions , checked 2026-10-23help.sealy.com: 4587440016791 How do I store my mattress if I am moving , checked 2026-10-23dawnlatexmattress.com.au: care and maintenance , checked 2026-10-23latexforless.com: warranty , checked 2026-10-23peacelily.com: warranty , checked 2026-10-23help.tuftandneedle.com: 577 can i use my mattress on the floor , checked 2026-10-23 JP About the author
Justine P.
Mattress answers writer
Justine P. is a French writer based in France who writes Nappedia's mattress answers. Each answer is built from published sources: brand help pages, buying guides and outside test results, each claim checked against its source and dated. Her goal: help you pick the right bed, or skip the wrong one.