Leesa Studio Mattress Review: Who Should Buy It?

The Leesa Studio's Medium firm option is the pick if you prefer a firmer feel. Sleep Foundation's October 8, 2026 reading was Medium Firm (6). Mattress Clarity's October 11, 2026 reading was 7.5/10, firmer-than-average. Sleepopolis's October 8, 2026 reading was Firm 7.5/10.

GoodBed rated the Studio Firm (3) on its 1=firmest, 9=softest scale. On that scale, 3 is closer to the firmest end than the softest end. If a soft feel is your priority, these outside readings point away from this mattress.

For sleepers over 230 lb, the Leesa Studio looks more promising for side sleep than back or stomach sleep, based on Sleep Foundation's ratings. Side sleep is the strongest fit in this group.

• Side: 8.0. Sleep Foundation reports good support, but says sinkage and added hip pressure may occur.
• Back: 5.5. Sleep Foundation says the medium-firm feel is probably too soft for this group. Deeper midsection sinkage may pressure the spine and cause aches.
• Stomach: 5.0 for sleepers over 230 lb. Separately, Sleep Foundation says the mattress is too soft for stomach sleepers over 130 pounds.

Leesa says the weight limit is 600 lb combined per bed and 300 lb per side. Sleep Foundation rates edge support 6.5/10, a point to weigh if you sleep near the perimeter.

The Leesa Studio has some positive back-support reports, but those do not show it will ease your pain. Leesa says its cradling memory foam helps relieve pressure on the back, hips, and shoulders. TechRadar’s tester reported lower back support and getting comfortable on their stomach without back pain. Sleepopolis’s reviewer reported back pressure relief and support for hip and spine alignment.

The medium-firm feel is the firmness to consider. Sleep Foundation says it may be too soft for back sleepers over 230 pounds. Their midsection may sink deeper and put pressure on the spine, so weigh that warning when choosing this mattress.

The Leesa Studio may sleep warm rather than neutral: TechRadar said it regularly got hot at night and rated temperature regulation 2/5, Poor. Leesa says the mattress has open-cell GreenFlex foam and a breathable knit cover with moisture-wicking viscose fibers that lets air flow. NapLab measured a maximum surface temperature of 90.6°F. The airflow features are a plus on paper, but TechRadar’s result is a reason to be cautious if you tend to overheat.

NapLab's readings do not establish whether you will feel your partner move. It recorded a motion-transfer score of 7.9 and acceleration of 9.65 m/s². Its bounce reading was 7.46″ in height, with a low feel. For a light sleeper with a restless partner, these are recorded readings, not a prediction of what you will feel. Low bounce alone does not establish low motion transfer.

At a Queen list price of $895, the Leesa Studio is worth considering if it fits your budget.

Use the table to match a size to your room. Paying for space you do not need will not improve value. Prices can change, so confirm the current list price when you order.

List prices checked Oct 22, 2026 · recheck before buying

Studio list prices by size

Height: 10 inches

Top to bottom, the Leesa Studio has a knit cover over three foam layers:

• Breathable Knit Cover: 87% polyester, 13% viscose.
• Ultra-Supportive Memory Foam: memory foam, 1.5 inches.
• GreenFlex BioFoam: biobased foam made with renewable, plant-based materials, 1 inch.
• High-Density Support Foam: high-density support foam, 7 inches.

The Queen weighs 68 lbs., so plan for that weight if you need to carry it into place. Leesa says the mattress is designed and assembled in the USA.

The Leesa Studio has a knit cover made of 87% polyester and 13% viscose. Its certifications address emissions, not the cover’s fabric blend.

CertiPUR-US® covers all foam layers for emissions. GREENGUARD Gold covers the mattress as a whole for chemical emissions, including volatile organic compounds, or VOCs. Leesa says this certification helps shoppers identify products with verified low chemical emissions, which matter for indoor air quality.

Leesa says the Leesa Studio is fiberglass-free. The company also says its mattresses use fire-retardant yarn made from a chemical-free rayon barrier. That is Leesa’s description of the barrier. If you own a Studio, check its law tag before making a decision about that specific bed. This keeps your choice tied to the mattress in your home, rather than relying only on a general company statement.

Use a firm, solid-surface base that supports the mattress and sleepers; adult-mattress slats must be no more than 5.5 inches apart. A box spring needs a bed frame that supports the combined weight. An adjustable base works if a proper bed frame supports that weight and keeps the mattress continuously supported. Leesa says an improper or unsupportive base can void the warranty; slats wider than 5.5 inches or direct use on a coil box spring void the Limited Lifetime Warranty.

Sleep Foundation puts the Leesa Studio at around six to seven years, while Leesa says never flip it and rotate it instead. Sleep Foundation says it likely will not exceed that range, so treat it as a replacement planning window, not a guarantee.

Leesa says the break-in period usually lasts about 30 days. Rotate it 180 degrees head to foot monthly for the first 3 months, then every 3 to 6 months to help it wear evenly.

The brand says Ryder handles delivery for orders using its service, usually 7-15 business days after purchase. Ryder in-home setup and old mattress removal are optional; check whether they are available for your address and ask about the cost before ordering.

The brand says the Leesa Studio trial lasts 120 nights and lists free returns. The $100 return fee applies only in Alaska, Hawaii, and Canada. If you live in one of those regions, budget for that fee before deciding whether the trial suits you.

The Leesa Studio warranty covers defects, with no-cost repair or replacement in the first 10 years; sagging must reach 1.5 inches. In years 11 through 15, prorated replacement costs 50 percent of the then-current retail price, so your share can change with that price. Coverage is void if slats are over 5.5 inches apart or the mattress sits directly on a coil box spring. Check the sag and base setup before filing a claim.

Owners praise comfort and support, but firmness fit varies. Leesa's site lists 94 reviews. On Walmart, comfort was the most-tagged topic, with 24 tags; one owner said the mattress felt comfortable and was easy to put on a bed frame.

A recent Walmart owner found it a bit soft, while Sleep Advisor says some owners find it too firm. That split matters if you have a clear firmness preference: comfort praise does not settle the feel. Check whether you prefer a softer or firmer bed before choosing; these reports flag a fit question, not a universal result.

Studio compares with siblings on features, rivals on budget or pressure relief.

• Leesa Original: choose breathable all-foam comfort; Leesa says its memory foam cradles and eases pressure.
• Sapira: choose breathable foams and motion-reducing springs.
• Sapira Chill: choose its cooling hybrid and three comfort levels.
• Legend Chill: choose cooling and dual springs; Leesa says its foams and springs contour for pressure relief and motion isolation.
• Natural Essential: choose cotton, wool, latex, and reclaimed steel springs.
• Reserve: choose advanced cooling and dual springs for motion isolation.
• Studio Chill: choose cooling foams, airflow-boosting springs, and targeted support.
• Plus: choose more substantial support; Leesa says its total weight limit is 1,000 pounds.
• Legend: choose a plush hybrid; Leesa says its two spring systems relieve pressure.
• Oasis Chill: Leesa markets it for hot sleepers or back- or hip-pain relief, not a guaranteed outcome.

Siena is the budget pick: Sleep Foundation calls it an affordable all-foam option and rates Siena and Studio 7.5/10 for pressure relief. Loom & Leaf’s Queen price is $3,179; Sleep Foundation rates it 9/10, so choose it for pressure relief.

The Leesa Studio launched in 2020, and its build changed by 2026. The middle transitional poly foam layer changed to GreenFlex foam, so older descriptions may not match the later version.

In 2026, NapLab measured its test version 0.5 inches thinner than the previous version. Keep that difference in mind when comparing older coverage with the 2026 version.

We read the maker's own pages, outside testers and owner reviews, and we date every fact. We do not test beds ourselves. Every source we used is listed below with the day we checked it.